Raspberry Pi

Monitors which are known to be compatible with Raspberry Pi can be seen below:

619AT - 7" LED HDMI Touchscreen Field Monitor

http://lilliputdirect.com/lilliput-619a-touchscreen?search=619at

This unit has been tested with the ever popular Raspberry Pi computer board and is 100% compatible. Also available is an optional pre-built driver set for the Raspberry Pi based on the Raspbian Wheezy OS

 

869GL-80NP/C/T - 8" HDMI touch screen monitor

http://lilliputdirect.com/lilliput-869gl-touchscreen?search=869

This monitor is compatible, as our pre-installed software for plug and play touch screen functions are for the Raspberry Pi. 

 

FA1011-NP/C/T - 10.1" HDMI touch screen monitor

http://lilliputdirect.com/lilliput-fa1011-touchscreen?search=FA1011

The FA1011-NP/C/T is compatible. However you will need to install the correct driver set to make it work. I have attached a copy of the instruction set that was developed for Raspbian Wheezy a while ago. It hasn't changed with Raspbian Jessie, so you should be good to proceed using it.

 

FA1012-NP/C/T - 10.1" HDMI capacitive touch screen monitor

http://lilliputdirect.com/lilliput-hdmi-monitors/10-inch-hdmi-lilliput-monitors/lilliput-fa1012-capacitive-touchscreen

This unit is a capacitive touch screen and therefore has limited compatibility with the Raspberry Pi dependant on O/S Distro, please check and ensure the compatibility first.  

 

FA1014-NP/C/T - 10.1" HDMI Capacitive Touch screen monitor

http://lilliputdirect.com/lilliput-fa1014-10-inch-capacitive-touchscreen-monitor?search=FA1014-NP%2FC%2FT

The FA1014 is HDMI compatible making it a good match for the Raspberry Pi for small form PC systems. However it has not been confirmed with which kind of driver set will make it work, therefore please check your operating system before purchasing to ensure compatibility.

 

TK1330-NP/C/T - 13.3" 1920x1080 HDMI Capacitive Touch screen monitor

http://lilliputdirect.com/lilliput-tk1330-1920x1080-capacitive-touchscreen-monitor?search=TK1330-NP%2FC%2FT

The TK1330-NP/C/T monitor should work without the need for installing any other drivers - the Raspbian OS has this driver set built in as standard.