The Lilliput 665/IP is a 7" monitor unit that has an input for a standard IP / RJ45 connection and allows you to feed the signal from an IP security camera into your monitor unit either directly, or via a suitably equipped hub.
Click Here For Full Specification Sheet |
Click Here For CE - EMC Certificate |
PLEASE NOTE - BEFORE ORDERING PLEASE CHECK THAT YOUR CAMERAS OUTPUT FEED IS COMPATIBLE WITH THIS MONITOR. IT IS DESIGNED TO TAKE AN IP VIDEO FEED (**WITHOUT A PoE CONNECTION**) AND CAN ALSO TAKE A DIRECT HDMI FEED VIA THE HDMI PORT |
| Designed to be used with a camera feed, the 665-IP is compatible with any camera resolution feed compliant to HDMI standards - ie, 1920 x 1080p and below. This is to offer the best quality input feed to the system and allow for a sharper integration of image into your security system. |
![]() | The 665-IP unit takes a direct network feed to the RJ45 input at the back of the monitor. This can be fed either directly from the camera unit itself or - if you have a plexing system in place - from an RJ45 router which is properly configured to accept the video feed through |
![]() | The screen size is a robust and 7" - large enough to be perfectly visible from a single feed camera, and yet small enough to be discreet in a home security environment. The high resolution gives an extremely detailed image making it an ideal choice for the security system user. |
![]() | In HDMI Mode the unit will give a loop through function, meaning that if you were using this monitor via its HDMi inoput (and not the RJ45 input) you would also be able to loop it through to a different HDMi input device. |
Mounting options - The 665-IP can be mounted in a number of configurations depending on the exact location you need to install it. It has 1/4" BSW thread holes at the sides and bottom so it can be mounted on an armature, an attachment point which can also be used with a gimbal bracket for attachment to a flat wall space. | |
![]() | Unlike most monitors the 665 has been designed to accept a wide range of input voltage from 6 to 24V. This allows connection to diverse power sources giving greater flexibility when used in outdoor environments. |
Monitor Specification | |
Screen Size (diagonal) | 7" |
Aspect Ratio | 16:9 |
Native Resolution | 1024×600 (native) |
Maximum Resolution | 1920×1080 - Maximum Supported Resolution |
Viewing Angle (degrees) | 150º x, 145º y |
Brightness Ratio (cd/m2) | 250 |
Contrast Ratio | 700:1 |
Video Inputs | IP (via RJ45), HDMI, Component, Composite |
Video Outputs | HDMI, Composite, Component (Note - does not cross-convert) |
Audio Outputs | <1W |
Input Power | DC 6-24V (via XLR) DC 12V via DC jack |
Operating Temperature | -20°c to +60°c |
Mounting Options | ¼ inch BSW Thread Holes, Gimbal Bracket |
Contents Of Box | |
Product | 1 x 665-IP Monitor |
Connection Cables | 1× HDMI to mini-HDMI cable. RJ45 cables / nertwork setup not included |
Power Adaptor | 1x 12V 1.5A DC plug (available in UK, US and EU style) |
Lilliput 665-IP 7" IP Monitor with RJ45 connection
- Brand: Lilliput
- Product Code: 665-IP
- EAN: 6950821600542
- Availability: 2-3 Days
-
300.00€
- Ex Tax: 250.00€
Related Products
Anton Bauer Battery Plate
This battery plate allows for the use of Anton Bauer batteries with Lilliput 665GL monitors. Ex..
28.17€
DU21 DSLR Battery Plate
This battery plate allows for the use of Panasonic DU21 type batteries with several Lillput monitors..
21.13€
F970 DSLR Battery Plate
This battery plate allows for the use of Sony F970 type batteries with several Lillput monitors type..
21.13€
LP-E6 DSLR Battery Plate
This battery plate allows for the use of Canon LP-E6 type batteries with several Lillput monitors ty..
21.13€
V-Lock Battery Plate
This battery plate allows for the use of V-lock mount style camcorder batteries with Lillput 665GL, ..
27.80€
QM91D DSLR Battery Plate
This battery plate allows for the use of Sony QM91D type batteries with several Lillput monitors typ..
21.13€
11" Articulating Arm - mount for Lilliput monitors and cameras
11" articulating magic arm with ¼ inch BSW thread and shoe mount adapter. Compatible with Lilliput m..
35.21€
Replacement 12V XLR Adaptor (UK Plug Fitting)
This moulded 12v supply has an XLR plug fitting at the appliance end, and a 3 PIN UK mains plug / tr..
10.33€
12V Car Cigarette Lighter Power Adaptor
Description# Cable Length (cm): Just Cable: 150cm, With Connectors: > 162cm# DC Connector: 2.1mm ..
14.08€
BNC to RCA adaptor x 2
Converts BNC connections into RCA connections. Allows the connection of composite RCA cables to BNC ..
6.90€
F970 DSLR Compatible battery - use with compatible Lilliput monitors
Sony F-970 Compatible battery for use on Lilliput monitors that have been supplied with the F970 typ..
35.77€
Sunshade for 7" Lilliput Monitors
These 7" sunshades are direct replacement for the sunshade model Lilliput monitors..
17.61€
1m BNC Male to BNC Male SDI Lead
High quality BNC lead for AV, computer, DSLR and CCTV applications. Features fully shielded hi..
14.40€
Replacement 12V XLR Adaptor (US Plug Fitting)
This moulded 12v supply has an XLR plug fitting at the appliance end, and a 2 PIN U.S mains plug / t..
10.33€
Replacement 12V XLR Adaptor (EU Plug Fitting)
This moulded 12v supply has an XLR plug fitting at the appliance end, and a 2 PIN EU mains plug (Sch..
10.33€
Replacement 12V Adaptor (EU Plug Fitting)
This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..
10.33€
Replacement 12V Adaptor (US Plug Fitting)
This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..
10.33€
7" Carry case with integrated sunshade
Travel bag and sunshade all in one - this carry case has space for a single 7" field monitor and com..
252.00€
Replacement 12V Adaptor (AUS Plug Fitting)
This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..
10.33€
![]() | Customisation Options Are AvailableYou can customise many options with all units of Lilliput product - from custom logos to input types to customised bezel and mounting options. To discuss your requirements please contact us via email Here or give us a call on +44 (0)8450068868 |