Q. What connections can be used to attach my equipment to this monitor?

A. The FA1011-NP/C can attach using an HDMI connector, a DVI connector, Composite connections, or through a VGA connector. The HDMI / DVI connectors mount directly into the side of the monitor, whilst the VGA / Composite connections are made through an SKS connector which plugs into the side of the monitor and acts as a bridge cable for these connections. All these cables are included for use straight out of the box.

Q. Does this unit have a touch screen?

A. No – however the sister product to this model – the FA1011-NP/C/T does have a touch screen.

Q. What is the power requirement of this monitor?

A. The power supply included with the unit is a 12V 2A standard wall socket connector. The unit itself uses 9-24V, and the current usage is 650mA. Power consumption is <9W for this unit.

Q. Can I use my camera batteries to power this monitor?

A. This monitor does not support battery power natively. If you’d like to use battery power, we supply alternative models 665GL-70NP/HO/Y, 667GL-70NP/H/Y, and 668GL-70NP/H/Y and FA1013-NP/H/Y which may be applicable for your needs.

Q. What are the monitor dimensions?

A. The monitor dimensions are – Width: 254.5mm, Height: 163mm, Depth: 63.5mm (with stand attached, 35mm without stand)

Q. What resolutions does the FA1011-NP/C support?

A. The native resolution is 1024 x 600 pixels, however it will support inputs (through scaling) of 480p (640 x 480), 576i (PAL resolution interlaced), 720p (1280 x 720 progressive scan), 1080i (1920 x 1080 interlaced) and 1080p (1920 x 1080 progressive scan). Differences in aspect ratio between the input signal and the monitor can be rectified using the monitors built in aspect ratio configuration setting – however some ratios will result in horizontal “widescreen” bars or image stretching (particularly common with Canon 5D-ii and Nikon cameras.)

Q. How many pixels does the panel have? 

A. The panel has a native resolution of 1024 x 600, giving 614400 pixels on screen.

Q . What does the unit weigh?

A. The weight of the unit is 1124g

Q. How can this unit be mounted?

A. There are three ways to mount the unit – the first of which is to use the stand for desktop mounting. If you would prefer, this can be removed using a screwdriver to  reveal a ¼ “ BSW thread for mounting the monitor onto a shoe or bracket. Also, the unit has VESA 75 mounting holes in the back so it can be mounted using any number of commercially available mounting solutions.

Q. Can I attach headphones to this monitor for sound? 

A. No – however the monitor does have a small speaker for cursory sound monitoring if required. It should be noted that the monitor will only play sound if the source connection is HDMI – the other connectivity cables do not pass sound into the system, only image.