The Lilliput 665/IP is a 7" monitor unit that has an input for a standard IP / RJ45 connection and allows you to feed the signal from an IP security camera into your monitor unit either directly, or via a suitably equipped hub.

PLEASE NOTE - BEFORE ORDERING

PLEASE CHECK THAT YOUR CAMERAS OUTPUT FEED IS COMPATIBLE WITH THIS MONITOR. IT IS DESIGNED TO TAKE AN IP VIDEO FEED (**WITHOUT A PoE CONNECTION**) AND CAN ALSO TAKE A DIRECT HDMI FEED VIA THE HDMI PORT

	Designed to be used with a camera feed, the 665-IP is compatible with any camera resolution feed compliant to HDMI standards - ie, 1920 x 1080p and below. This is to offer the best quality input feed to the system and allow for a sharper integration of image into your security system.
	The 665-IP unit takes a direct network feed to the RJ45 input at the back of the monitor. This can be fed either directly from the camera unit itself or - if you have a plexing system in place - from an RJ45 router which is properly configured to accept the video feed through
	The screen size is a robust and 7" - large enough to be perfectly visible from a single feed camera, and yet small enough to be discreet in a home security environment. The high resolution gives an extremely detailed image making it an ideal choice for the security system user.
	In HDMI Mode the unit will give a loop through function, meaning that if you were using this monitor via its HDMi inoput (and not the RJ45 input) you would also be able to loop it through to a different HDMi input device.
	Mounting options - The 665-IP can be mounted in a number of configurations depending on the exact location you need to install it. It has 1/4" BSW thread holes at the sides and bottom so it can be mounted on an armature, an attachment point which can also be used with a gimbal bracket for attachment to a flat wall space.
	Unlike most monitors the 665 has been designed to accept a wide range of input voltage from 6 to 24V. This allows connection to diverse power sources giving greater flexibility when used in outdoor environments.

Monitor Specification
Screen Size (diagonal)	7"
Aspect Ratio	16:9
Native Resolution	1024×600 (native)
Maximum Resolution	1920×1080 - Maximum Supported Resolution
Viewing Angle (degrees)	150º x, 145º y
Brightness Ratio (cd/m2)	250
Contrast Ratio	700:1
Video Inputs	IP (via RJ45), HDMI, Component, Composite
Video Outputs	HDMI, Composite, Component (Note - does not cross-convert)
Audio Outputs	<1W
Input Power	DC 6-24V (via XLR) DC 12V via DC jack
Operating Temperature	-20°c to +60°c
Mounting Options	¼ inch BSW Thread Holes, Gimbal Bracket
Contents Of Box
Product	1 x 665-IP Monitor
Connection Cables	1× HDMI to mini-HDMI cable. RJ45 cables / nertwork setup not included
Power Adaptor	1x 12V 1.5A DC plug (available in UK, US and EU style)

Lilliput 665-IP 7" IP Monitor with RJ45 connection

Brand: Lilliput
Product Code: 665-IP
EAN: 6950821600542

Availability: 2-3 Days

300.00€
Ex Tax: 250.00€

Qty

Customisation Options Are Available

You can customise many options with all units of Lilliput product - from custom logos to input types to customised bezel and mounting options. To discuss your requirements please contact us via email Here or give us a call on +44 (0)8450068868

The Lilliput 665/IP is a 7" monitor unit that has an input for a standard IP / RJ45 connection and allows you to feed the signal from an IP security camera into your monitor unit either directly, or via a suitably equipped hub.

Lilliput 665-IP 7" IP Monitor with RJ45 connection

300.00€

Related Products

Anton Bauer Battery Plate

DU21 DSLR Battery Plate

F970 DSLR Battery Plate

LP-E6 DSLR Battery Plate

V-Lock Battery Plate

QM91D DSLR Battery Plate

11" Articulating Arm - mount for Lilliput monitors and cameras

Replacement 12V XLR Adaptor (UK Plug Fitting)

12V Car Cigarette Lighter Power Adaptor

BNC to RCA adaptor x 2

F970 DSLR Compatible battery - use with compatible Lilliput monitors

Sunshade for 7" Lilliput Monitors

1m BNC Male to BNC Male SDI Lead

Replacement 12V XLR Adaptor (US Plug Fitting)

Replacement 12V XLR Adaptor (EU Plug Fitting)

Replacement 12V Adaptor (EU Plug Fitting)

Replacement 12V Adaptor (US Plug Fitting)

7" Carry case with integrated sunshade

Replacement 12V Adaptor (AUS Plug Fitting)

Customisation Options Are Available