The Lilliput 665/IP is a 7" monitor unit that has an input for a standard IP / RJ45 connection and allows you to feed the signal from an IP security camera into your monitor unit either directly, or via a suitably equipped hub.




PLEASE NOTE - BEFORE ORDERING

PLEASE CHECK THAT YOUR CAMERAS OUTPUT FEED IS COMPATIBLE WITH THIS MONITOR. IT IS DESIGNED TO TAKE AN IP VIDEO FEED (**WITHOUT A PoE CONNECTION**) AND CAN ALSO TAKE A DIRECT HDMI FEED VIA THE HDMI PORT

 Camera Feed

Designed to be used with a camera feed, the 665-IP is compatible with any camera resolution feed compliant to HDMI standards - ie, 1920 x 1080p and below. This is to offer the best quality input feed to the system and allow for a sharper integration of image into your security system.
 Ethernet NetworkThe 665-IP unit takes a direct network feed to the RJ45 input at the back of the monitor. This can be fed either directly from the camera unit itself or - if you have a plexing system in place - from an RJ45 router which is properly configured to accept the video feed through
7 inch 16:9 LCD

The screen size is a robust and  7" - large enough to be perfectly visible from a single feed camera, and yet small enough to be discreet in a home security environment. The high resolution gives an extremely detailed image making it an ideal choice for the security system user.

 HDMI outputIn HDMI Mode the unit will give a loop through function, meaning that if you were using this monitor via its HDMi inoput (and not the RJ45 input) you would also be able to loop it through to a different HDMi input device.

Mounting options - The 665-IP can be mounted in a number of configurations depending on the exact location you need to install it. It has 1/4" BSW thread holes at the sides and bottom so it can be mounted on an armature, an attachment point which can also be used with a gimbal bracket for attachment to a flat wall space.
High brightness monitor

Unlike most monitors the 665 has been designed to accept a wide range of input voltage from 6 to 24V. This allows connection to diverse power sources  giving greater flexibility when used in outdoor environments.

Monitor Specification
Screen Size (diagonal) 7"
Aspect Ratio 16:9
Native Resolution 1024×600 (native)
Maximum Resolution 1920×1080 - Maximum Supported Resolution
Viewing Angle (degrees) 150º x, 145º y
Brightness Ratio (cd/m2) 250
Contrast Ratio 700:1
Video Inputs IP (via RJ45), HDMI, Component, Composite
Video Outputs HDMI, Composite, Component (Note - does not cross-convert)
Audio Outputs <1W
Input Power DC 6-24V (via XLR) DC 12V via DC jack
Operating Temperature -20°c to +60°c
Mounting Options ¼ inch BSW Thread Holes, Gimbal Bracket
Contents Of Box
Product 1 x 665-IP Monitor
Connection Cables 1× HDMI to mini-HDMI cable. RJ45 cables / nertwork setup not included
Power Adaptor 1x 12V 1.5A DC plug (available in UK, US and EU style)

Lilliput 665-IP 7" IP Monitor with RJ45 connection

  • Brand: Lilliput
  • Product Code: 665-IP
  • EAN: 6950821600542
  • Availability: 2-3 Days
  • 300.00€


Related Products

Anton Bauer Battery Plate

Anton Bauer Battery Plate

This battery plate allows for the use of Anton Bauer batteries with Lilliput 665GL monitors. Ex..

28.17€

DU21 DSLR Battery Plate

DU21 DSLR Battery Plate

This battery plate allows for the use of Panasonic DU21 type batteries with several Lillput monitors..

21.13€

F970 DSLR Battery Plate

F970 DSLR Battery Plate

This battery plate allows for the use of Sony F970 type batteries with several Lillput monitors type..

21.13€

LP-E6 DSLR Battery Plate

LP-E6 DSLR Battery Plate

This battery plate allows for the use of Canon LP-E6 type batteries with several Lillput monitors ty..

21.13€

V-Lock Battery Plate

V-Lock Battery Plate

This battery plate allows for the use of V-lock mount style camcorder batteries with Lillput 665GL, ..

28.17€

QM91D DSLR Battery Plate

QM91D DSLR Battery Plate

This battery plate allows for the use of Sony QM91D type batteries with several Lillput monitors typ..

21.13€

11" Articulating Arm - mount for Lilliput monitors and cameras

11" Articulating Arm - mount for Lilliput monitors and cameras

11" articulating magic arm with ¼ inch BSW thread and shoe mount adapter. Compatible with Lilliput m..

35.21€

..

0.00€

Replacement 12V XLR Adaptor (UK Plug Fitting)

Replacement 12V XLR Adaptor (UK Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible...

10.33€

12V Car Cigarette Lighter Power Adaptor

12V Car Cigarette Lighter Power Adaptor

Description# Cable Length (cm): Just Cable: 150cm, With Connectors: > 162cm# DC Connector: 2.1mm ..

14.08€

BNC to RCA adaptor x 2

BNC to RCA adaptor x 2

Converts BNC connections into RCA connections. Allows the connection of composite RCA cables to BNC ..

6.90€

F970 DSLR Compatible battery - use with compatible Lilliput monitors

F970 DSLR Compatible battery - use with compatible Lilliput monitors

Sony F-970 Compatible battery for use on Lilliput monitors that have been supplied with the F970 typ..

35.77€

Sunshade for 7" Lilliput Monitors

Sunshade for 7" Lilliput Monitors

These 7" sunshades are direct replacement for the sunshade model Lilliput monitors..

17.61€

1m BNC Male to BNC Male SDI Lead

1m BNC Male to BNC Male SDI Lead

High quality BNC lead for AV, computer, DSLR and  CCTV applications. Features fully shielded hi..

14.40€

Replacement 12V XLR Adaptor (US Plug Fitting)

Replacement 12V XLR Adaptor (US Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible...

10.33€

Replacement 12V XLR Adaptor (EU Plug Fitting)

Replacement 12V XLR Adaptor (EU Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible...

10.33€

..

0.00€

Replacement 12V Adaptor (EU Plug Fitting)

Replacement 12V Adaptor (EU Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..

10.33€

Replacement 12V Adaptor (US Plug Fitting)

Replacement 12V Adaptor (US Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..

10.33€

7" Carry case with integrated sunshade

7" Carry case with integrated sunshade

Travel bag and sunshade all in one - this carry case has space for a single 7" field monitor and com..

252.00€

Replacement 12V Adaptor (AUS Plug Fitting)

Replacement 12V Adaptor (AUS Plug Fitting)

This moulded 12v supply comes as standard in 99% of Lilliput units and so is completely compatible.T..

10.33€




Customisation Options Are Available

You can customise many options with all units of Lilliput product - from custom logos to input types to customised bezel and mounting options. To discuss your requirements please contact us via email Here or give us a call on +44 (0)8450068868